SABER Technical Regulation for Machinery Safety (Part 2)

Related Standards

The following international and national standards are referenced in this technical regulation:

• SASO ISO 3457 — Earth‑Moving Machinery — Guards — Definitions and Requirements
• SASO ISO 5006 — Earth‑Moving Machinery — Operator’s field of view — Test method and performance criteria
• SASO ISO 2867 — Earth‑Moving Machinery — Access systems
• SASO ISO 3471 — Earth‑Moving Machinery — Roll-over protective structures (ROPS) for wheeled machines
• SASO ISO 3472 — Earth‑Moving Machinery — Roll-over protective structures (ROPS) for tracked machines
• SASO ISO 6165 — Tractors and machinery for agriculture and forestry — Power take-off (PTO) shafts — Dimensions and tests
• SASO ISO 5001 — Earth‑Moving Machinery — Operator controls and displays — Function and location
• SASO ISO 6166 — Agricultural Machinery — Safety of PTO protective devices
• SASO ISO 12100 — Safety of Machinery — General principles for design — Risk assessment and risk reduction
• SASO ISO 13849‑1 — Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
• SASO ISO 13850 — Safety of machinery — Emergency stop function — Principles for design
• SASO ISO 13857 — Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs
• SASO ISO 11161 — Safety of machinery — Integrated manufacturing systems — Basic requirements
• SASO ISO 3744 — Acoustics — Determination of sound power levels of machinery and equipment — Engineering method
• SASO ISO 11201 — Acoustics — Measurement of noise emitted by machinery and equipment — Workplace method
• SASO ISO 5349‑1 — Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 1: General requirements
• SASO ISO 5349‑2 — Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace
• SASO ISO 10263‑1 — Earth-moving machinery — Loaders — Determination of static stability
• SASO ISO 10263‑2 — Earth-moving machinery — Loaders — Determination of tipping loads with full bucket
• SASO ISO 22915‑1 — Agricultural and forestry machinery — Safety — Part 1: General requirements for machinery
• SASO ISO 22915‑2 — Agricultural and forestry machinery — Safety — Part 2: Special requirements for tractors
• SASO ISO 22915‑3 — Agricultural and forestry machinery — Safety — Part 3: Special requirements for harvesting machinery
• SASO ISO 22915‑4 — Agricultural and forestry machinery — Safety — Part 4: Special requirements for self-propelled implements
• SASO ISO 22915‑5 — Agricultural and forestry machinery — Safety — Part 5: Special requirements for other mobile machinery
• SASO ISO 3691‑1 — Industrial trucks — Safety requirements — Part 1: General requirements
• SASO ISO 3691‑2 — Industrial trucks — Safety requirements — Part 2: Additional requirements for hand‑operated trucks
• SASO ISO 3691‑3 — Industrial trucks — Safety requirements — Part 3: Additional requirements for trucks with driver standing
• SASO ISO 3691‑4 — Industrial trucks — Safety requirements — Part 4: Additional requirements for trucks with operator seated
• SASO ISO 5007 — Earth‑Moving Machinery — Operator controls — Function, location, and identification
• SASO ISO 6164 — Tractors and machinery for agriculture and forestry — Stability testing